Tweet
CPU installation is fairly simple, but there’s always some room for errors.
Installing a CPU on a motherboard is one of the most important steps you’ll take while building a PC. This crucial task, however, is fairly simple, and it only takes a few seconds to do it. You’re less likely to make a mistake while installing a CPU, but there’s always room for errors, especially if you are new to building PCs. If you are indeed building your first PC and are wondering whether it’s possible to put the CPU in the wrong way, then the short answer is no. At least as long as you are being careful and not rushing or approaching the installation process recklessly.
I say that because the CPU sockets located on the motherboard have tabs on them to prevent you from incorrectly installing the processor. The processor may sometimes fit in if you apply pressure on it and force it to settle, but you’ll end up bending the pins in the process which often results in irreparable damage. That’s why it’s important to be careful and pay close attention to the tabs and the notches on the CPU and the socket on the motherboard while installing the processor.
How to avoid installing a CPU the wrong way
Installing the CPU the wrong way can be quite detrimental to the pins on the CPU or the socket. But thankfully, there is an easy way to ensure you don’t end up forcing the processor to sit on the socket the wrong way. The only thing you need to do is look for a tiny triangle indicator on the corner of the CPU and the socket and align them properly. The CPU will lay flat on the socket without having to apply any force or pressure whatsoever. Lowering the metal frame onto the CPU and locking it will take some force, so keep that in mind.
If you do end up placing the CPU on the socket the wrong way, then simply lift it back up and install it correctly instead of forcing it to sit in place. The only thing to keep in mind is to not bend or break the pins, so you don’t end up with a broken component. Depending on the make and model of your processor, you’ll either see pins on your CPU or the socket on the motherboard. It’s best not to touch the pins, so only touch the sides of the CPU while holding it.
How to know if the CPU is correctly installed
You’ve installed the CPU correctly if it ended up lying flat on the motherboard socket without having to force or applying pressure on it. But the only other way to tell if you’ve installed it correctly is by finishing the build and booting the PC. Everything is in place if your computer boots successfully and enters the BIOS. If not, then you’ll have to go back and see if you ended up installing it incorrectly, and ensure the pins are not bent or damaged.
** (Disclaimer: This video content is intended for educational and informational purposes only) **
More...
