[BETA] iPhone 30 Beta 4 (Released April 28) Firmware iTunes Beta

[ICEM/\N]

iPhone 3.0 Beta 4 (Released April 28) Firmware + iTunes Beta

iPhone 3.0 Beta 4 Released - Find it Below

If you are getting a "Your software has expired" message Upgrade your iPhone 3.0 Beta with the latest release of the Beta. The links are below. I will keep updating this topic with new versions as they are released.





Here is the firmware for iPhone 3G - Beta 4 - Released April 28 2009...

Code

http://rapidshare.com/files/226964637/iPhone1_2_3.0_7A300g_Restore.ipsw.001 
http://rapidshare.com/files/226964866/iPhone1_2_3.0_7A300g_Restore.ipsw.002 
http://rapidshare.com/files/226965024/iPhone1_2_3.0_7A300g_Restore.ipsw.003

Here is the firmware for iPhone Original (First Gen.) - Beta 4 - Released April 28 2009...

Code

http://rapidshare.com/files/226964257/iPhone1_1_3.0_7A300g_Restore.ipsw.001 
http://rapidshare.com/files/226964452/iPhone1_1_3.0_7A300g_Restore.ipsw.002 
http://rapidshare.com/files/226964479/iPhone1_1_3.0_7A300g_Restore.ipsw.003

To install this update you will need the pre-release iTunes 8.2 Beta

For Mac

Code

http://rapidshare.com/files/226965781/itunes_8.2_prerelease_for_mac_os_x.dmg

For Windows (32-Bit)

Code

http://rapidshare.com/files/226965306/itunessetupwindows.zip

For Windows (64-Bit)

Code

http://rapidshare.com/files/226969230/ituneswindows64setup.zip

Do the following to find your UDID...

“ Quote ”

To find your iPhone's UDID, just plug it into your computer and wait until iTunes recognizes it. Select your phone from the Devices list in iTunes and click the "Summary" tab. To see your UDID, click on the word "serial number" beside the picture of the iPhone. You should see the word "identifer" and an alphanumeric string – this is your UDID.

To copy it, just press command + C on your Mac's keyboard (or control + C in Windows).

To Restore to 2.2.1 do the following: It seems that Mac does not recognize the iPhone in DFU mode... its best to do the following on a PC you must know you can only downgrade your iPhone Firmware 3.0 but not baseband 04.20.01. - No Guarantees... I have not tried this yet

“ Quote ”

How to Downgrade iPhone Firmware 3.0 to 2.2.1
1. Connect your iPhone to your Mac or PC and select your iPhone from the list of devices in iTunes
2. If iTunes does not detect your iPhone then you will need to put it in DFU (Device Firmware Upgrade) mode.
3. Browse the Summary Tab,
Mac Users,
Hold down Option and press the “Restore” button
Windows Users,
Hold down Shift and press the Restore button
4. Now browse the folder where you have the iPhone firmware.Select the firmware & hit the restore button and cross your fingers for 5 minutes.
5. Ignore error message like 1011, 1013, 1015 (Actually the firmware 2.2.1 is already successfully installed)
6. Use QuickPWN 2.2.5 to Jailbreak iPhone Firmware 2.2.1
Steps to put iPhone in DFU mode
1. Connect your iPhone to your computer.
2. Turn iPhone off.
3. Hold power and home together for 10 seconds (exactly).
4. Release power but keep holding home until the computers beeps (observed on a PC) as a USB device is recognized.
5. A few seconds later iTunes should detect your iPhone.
Please Note :- If you encountered with error message like 1601, 1602, 1600 or anything else then try putting the
iPhone into DFU mode and try again.