[RELEASE] Garmin Mobile XT for Windows Mobile software version 50020w

[kaos]

Garmin Mobile XT for Windows Mobile software version 5.00.20w


Requirements: Windows Mobile 2003/SE/WM5/WM6 PocketPs with GPS receiver
Overview: Add full-featured navigation to your GPS-enabled smartphone with Garmin Mobile XT. Just plug this data card into your compatible phone¹ (see specs tab) and start navigating. With no monthly fees, preloaded maps, turn-by-turn directions, real-time services and only $99, this easy-to-use data card has everything you need to navigate to the front door.

Notes:

* The Garmin Mobile XT for Windows Mobile software is designed for use on Microsoft Windows Mobile Pocket PC and Smartphone devices.
* You must have a previous version of the XT software installed on your SD card to have all of the help files, voice files and basemap files. These are not included with this update.
* During installation, you will be prompted to turn on your GPS device.
* A minimum card size of 256 MB is recommended for Garmin Mobile XT software with maps.
* If you have previously installed the Garmin Que for Pocket PC application, you must uninstall Garmin Que before installing the Garmin Mobile XT application.
* If you are updating from version 4.10.40 or earlier, you may encounter a new input screen the first time you start the application after the update. If you have a Garmin GPS receiver, select the appropriate link to connect to the receiver.

Change History
Changes made from version 5.00.10 to 5.00.20:

* Update the subcategories listed for City Navigator Europe 2009 maps.
* Correct various out of memory conditions that can occur.
* Correct the processing of a received Location Message to not save the point on the Recent Finds list.
* Correct the processing of received text messages to not close the GMXT application when a text message is received without a subject.
* Correct an error that occurs when a headset is plugged into some devices.
* Correct the use of the directional pad for movement between hyperlinks within Flight Status.
* Correct saving and editing waypoints with non-English characters.

Changes made from version 5.00.00 to 5.00.10:

* Correct My Locations list to display the last item on the list.
* Correct display of the Estimated Departure Time within Flight Status.
* Correct various Google Local Search and Panoramio language issues.
* Correct Google Local Search to return to the correct previous page when selecting 'Back'.
* Correct Panoramio display so that it doesn't wrap back to the first item after reaching the end of the list.

Changes made from version 4.xx.xx to 5.00.00:

* Update the look and feel of the Garmin Mobile XT application.
* Add new Garmin Online feature - Google Local Search.
* Add new Garmin Online feature - Panaramio photos.
* Add new Garmin Online feature - Flight Status.
* Add Speed Limit display to the View Map.
* Add ability to install and display custom vehicle icons.
* Modify 'Peerpoints' feature name to 'Location Message'.


More Info:
Code:

http://www8.garmin.com/support/colle...t=010-00579-00

Download Instructions: All credits for the keygen go to JetMouse, as well as Lord Yuz and starix who helped with the creation of the keygen.

Code:

Installation procedure:

a) Start installation of 'GarminMobileXTforWindowsMobile_5.00.20w.exe' from PC through ActiveSync. Select your Storage Card as destination. During the installation, files will be copied to your storage card. The files should appear in '\Storage Card\Garmin\Apps\WM'.
b) Install 'GarminMobileXTSupportFiles_5xxxx.exe' for voice files. In storage card
c) Install 'GarminMobileXTFreeBasemap_5xxxx.exe' for Garmin's base map. In storage card
d) Run GarminMobileXT and click "Connect to a Garmin GPS" go to 'setting\about' record the Unit ID and use keygen to create unlock key.
e) Save as sw.unl file.
f) Copy 'sw.unl' to '\Storage Card\Garmin'.

Garmin Mobile XT for Windows Mobile software version 5.00.20w as of September 23rd, 2008

Download:
http://rapidshare.com/files/16388694...First_Poop.rar

passowrd
kaos@spj

you can get vehicle icons here
http://www8.garmin.com/vehicles/bund...lvehicles.html


On a side note!!!
This works on Touch Pro Perfect..All Screen Shots Are Off My Pro.

[Superman369]

Sick find bro, downloadin this sh*t now.

[kaos]

“ Originally Posted by ofcsu1 ”

Sick find bro, downloadin this sh*t now.

follow info from 4.20 thread on cracking it with gen...if not you will need these to put in the garmin folder on the sd
http://www8.garmin.com/support/downl...ls.jsp?id=3493

its the voices and shit/.................remember to click installed and press thank you...if you have another version installed uninstall it first....but save folder...

[speedygraphix]

please dont shoot me for being a noob.. but will this work on a mogul flashed to cricket? i know it relies on some sort of connection just dont know if cricket is capable of this. again sorry asking possibly a dumb question.

[slick78]

i have version 4.20.30wp, what is the best way to update to the new version?

[kaos]

“ Originally Posted by slick78 ”

i have version 4.20.30wp, what is the best way to update to the new version?

i coneected my phone to pc...draged over folder for garmin to pc...then uninstalled garmin from phone....then installed new...then i took old folders contents...like the swl file voice help i think two others that wern't in new one...dropped in rebooted and worked fine....

[TaylorSPJ]

since i have internal gps i dont need an external receiver do I? only reason i ask is cause it says scanning attatched but the process bar just sits at like a quater done for ever.

[iamdasht19]

“ Originally Posted by Taylor ”

since i have internal gps i dont need an external receiver do I? only reason i ask is cause it says scanning attatched but the process bar just sits at like a quater done for ever.

yes this will work fine with the internal one.

[TaylorSPJ]

“ Originally Posted by D/\SH ”

yes this will work fine with the internal one.

good deal, any ideas what i'm doing wrong? do i need to registor first in order to connect to the garmin sever?

--------- New Post Merged on 24/11/2008 at 0936 --------

I'm having trouble getting the product key, placed the sw.unl file in the garmin folder, pulled card soft reset and from there not sure how to get the key....it's probably easy as hell, must be missin it.

[iamdasht19]

“ Originally Posted by Taylor ”

good deal, any ideas what i'm doing wrong? do i need to registor first in order to connect to the garmin sever?

--------- New Post Merged on 24/11/2008 at 0936 --------

I'm having trouble getting the product key, placed the sw.unl file in the garmin folder, pulled card soft reset and from there not sure how to get the key....it's probably easy as hell, must be missin it.

kaos tells you the step by step process in post #6

[drdrewdown]

installed right over my existing installation & soft reset, it works like a charm!

[PsyChoTk]

Here's a support file for new voices and help files.


http://rapidshare.com/files/168398419/GMXT4xxxx.exe

[kaos]

“ Originally Posted by godslunatk ”

Here's a support file for new voices and help files.


http://rapidshare.com/files/168398419/GMXT4xxxx.exe

lol on first page..

[Will7272]

Just as a heads up, if you begin to have problems trying to install this thing from scratch, delete all of your mms and sms messages and you should be fine. Took me 3 days to figure this out. Nice find BTW SPJ.

[checker jim]

Kaos... you are killing me man... after installing your take 5 rom today I went to reinstall garmin and found this... works like a charm... AWESOME!!!!!

big thanks to you brother..

[livinlifes2shor]

when i use the key gen it gives me a long key and garmin only request a 6 digit key??

[drdrewdown]

“ Originally Posted by livinlifes2shor ”

when i use the key gen it gives me a long key and garmin only request a 6 digit key??

you must not have read any part of how to install it? the key should be placed in a file named sw.unl & saved in the storagecard/garmin directory & garmin will not ask for any keys.

Installation procedure:

a) Start installation of 'GarminMobileXTforWindowsMobile_5.00.20w.exe' from PC through ActiveSync. Select your Storage Card as destination. During the installation, files will be copied to your storage card. The files should appear in '\Storage Card\Garmin\Apps\WM'.
b) Install 'GarminMobileXTSupportFiles_5xxxx.exe' for voice files. In storage card
c) Install 'GarminMobileXTFreeBasemap_5xxxx.exe' for Garmin's base map. In storage card
d) Run GarminMobileXT and click "Connect to a Garmin GPS" go to 'setting\about' record the Unit ID and use keygen to create unlock key.
e) Save as sw.unl file.
f) Copy 'sw.unl' to '\Storage Card\Garmin'.

[Fatal_Error]

OK I feel like a total noob asking this. This is the 1st time I've tried to use this program( Been a sprint nav fan) So I started the install and as the instructions said to connect to the Garmin GPS and thats where I'm @ now it will not leave this screen it keeps saying scanning bluetooth and scanning attachments and before any says anything yes I did restart after the install

[drdrewdown]

its been ages since i've installed it the first time, once you do its always on your storage card & you just "re-initialize" it to get your icons back. but back to your question, if i remember right you just do what you can to get out of that screen so you can get to the unit id screen & crack it. if for some reason garmin cant connect i want to say try loading google maps or live search with the gps on & then leave one of them open while starting garmin. this should keep the gps active so garmin can talk to it the first time. like i said its been ages since i originally installed it, so i'm simply going from my memory, which can be a bit hazy lol

[checker jim]

just cancel while it is searching all you need is the unit id for the keygen. once you get the key. open notepad on your desktop copy the key and save as sw.unl then place that into the garmen folder on your phone. you dont need to connect to anything once you have that unit id for the keygen you can close garmin. after the .unl file is in place you can restart garmin and it will work. load your maps and your ready to roll...

[PsyChoTk]

“ Originally Posted by Fatal_Error ”

So I started the install and as the instructions said to connect to the Garmin GPS and thats where I'm @ now it will not leave this screen it keeps saying scanning bluetooth and scanning attachments and before any says anything yes I did restart after the install

another workaround is launching google maps first and select use gps. after connection, and leaving google maps open, launch garmin. this work around worked for me on my mogul. after the first time i tried this work around, garmin worked flawlessly.

[drdrewdown]

“ Originally Posted by godslunatk ”

another workaround is launching google maps first and select use gps. after connection, and leaving google maps open, launch garmin. this work around worked for me on my mogul. after the first time i tried this work around, garmin worked flawlessly.

is there an echo echo echo




but now seriously, thanks for confirming my memory isn't completely gone w00t

[PsyChoTk]

“ Originally Posted by drdrewdown ”

is there an echo echo echo




but now seriously, thanks for confirming my memory isn't completely gone w00t

drdrewdown, after carefull review, I realize I might want to turn in for the night since I've been up for the last 24 hours.

[drdrewdown]

hahahahha... only go to bed if you can sleep for 18 hours! otherwise just stay up for the rest of your life

[Fatal_Error]

guys please don't crap up this thread

[ninja_unmatched]

(Before I get started.) Okay I see the directions and the links. The supports files mentioned say 5xxxxx but the link to garmin site leads to an update page that has 4xxxx for the support files. That being the case, are the 4xxxx files being installed? Is this correct? I pay attention to detail and the details are off here so I have to confirm things.

--------- New Post Merged on 4/12/2008 at 1217 --------

“ Originally Posted by ninja_unmatched ”

(Before I get started.) Okay I see the directions and the links. The supports files mentioned say 5xxxxx but the link to garmin site leads to an update page that has 4xxxx for the support files. That being the case, are the 4xxxx files being installed? Is this correct? I pay attention to detail and the details are off here so I have to confirm things.

I guess the next question is loading maps. Would it be the same as with 4.20 that I had installed before. (My phone started acting up, rebooted, and never came back up. Had to reset phone.)

[drdrewdown]

“ Originally Posted by ninja_unmatched ”

(Before I get started.) Okay I see the directions and the links. The supports files mentioned say 5xxxxx but the link to garmin site leads to an update page that has 4xxxx for the support files. That being the case, are the 4xxxx files being installed? Is this correct? I pay attention to detail and the details are off here so I have to confirm things.

--------- New Post Merged on 4/12/2008 at 1217 --------



I guess the next question is loading maps. Would it be the same as with 4.20 that I had installed before. (My phone started acting up, rebooted, and never came back up. Had to reset phone.)

i used the base files & support files from the 4.* release. should be good bro

[livinlifes2shor]

i put the file in the garmin folder on the memory card and it still prompts to register. Do i need to put it in one of the folders that are in the garmin file. Please help and sorry for my ignorance!

[drdrewdown]

“ Originally Posted by livinlifes2shor ”

i put the file in the garmin folder on the memory card and it still prompts to register. Do i need to put it in one of the folders that are in the garmin file. Please help and sorry for my ignorance!

just needs to go in the storagecard/Garmin folder. be sure you've properly named the file

Code

sw.unl

the only thing that should be in this file is the key you generated.

a common mistake most people make, is leaving the file extensions disabled. u dont want the file name to be sw.unl.txt. please make sure you understand this part.

[livinlifes2shor]

i am one of those people lol. I got that but now when I launch garmin it gets stuck on the bootup screen and nothing happens?

[livinlifes2shor]

Not trying to be impatient just wondering if any one had any ideas on the above post still have not had any luck with getting this going. Thanks in advance

[drdrewdown]

i cant figure out what fone you have & have no idea the steps you've completed. until i have more information i cant offer any ideas. feel free to hit me on a aim/yim/icq if you heart desires.

[livinlifes2shor]

Ah yes that information would be helpful I have a ppc6800 with sprint. I have just reflashed with a custom rom yesterday. So when I get home from work this evening I am going to try the hole process over again. If i fail I may take you up on your above offer. Thanks

[kaos]

come on guys..Ive installed this like 100 times through out all my devices and roms updates...Its pretty simple read what i say and follow it...I give you the keygen...what more do you want? to use that like the post says follow the 4.20 post...search its there...5.20 also uses 4XXXX support files....

[livinlifes2shor]

Just goes to show you DETAIL DETAIL. I saved the key in note pad and deleted the .txt though that was it. HA I am a little slow some times. You gotta actually save it as all programs not .txt in the file type. Works great. Thanks alot for all the help every one and drdrewdown too!

[hallclj]

wassup, i just installed this on my sprint htc touch and it searches for a gps device, am i missing something? do i need to flash my phone? i am new to all of this so help will be greatly appriciated....and i had no problem with the install.....it works just unable to locate gps device.

[drdrewdown]

more information needed. does gps work on other apps ie.. google maps or live search?

feel free to hit me on the chat protocol of your choice: aim, yim, icq

[rockfish]

this is probally a dumb question but i not sure on how to do this.....
e) Save as sw.unl file.
i have the keygen number but im not sure on what to do with it. any help would be great....

[drdrewdown]

“ Originally Posted by rockfish ”

this is probally a dumb question but i not sure on how to do this.....
e) Save as sw.unl file.
i have the keygen number but im not sure on what to do with it. any help would be great....

ok first, just create a new txt file. right click somewhere & new>text document. open the new document & paste the key inside. go to file> save as.. set filename as sw.unl & the save as type > all files. save it & throw it on your storage card/garmin dir & ur set

[rockfish]

“ Originally Posted by drdrewdown ”

ok first, just create a new txt file. right click somewhere & new>text document. open the new document & paste the key inside. go to file> save as.. set filename as sw.unl & the save as type > all files. save it & throw it on your storage card/garmin dir & ur set

thanks so much.... worked great...... its the little details that help out, some of us just dont know all the lil tricks and i do appriciate it.

[checker jim]

this is a simple as they come... my wife put it on here phone and she knows nothing about them.... read the directions closely and you will have no troubles...

I have noticed that on my mogul the program never wants to start up. always says.. "the system is low on memory. please free some memory and restart the application"

usually have to restart the phone for it to work. but once its running it works great.. waaay cooler than the old version..

[drdrewdown]

welcome to the "Low Memory WinMo Phone Club!" i finally cancelled my membership when i got the HTC Touch. i was a star in the club starting off with my Tmobile Wing & then the mogul. i hope i never have to be in the club again LOL

[hallclj]

ok, so i found out the my htc touch dont have internal gps, is there any way that i can change that?

[Superman369]

“ Originally Posted by hallclj ”

ok, so i found out the my htc touch dont have internal gps, is there any way that i can change that?

????? The touch comes from the factory with a built in GPS.

[drdrewdown]

the HTC Touch(vogue) has a built in gps. no idea why anyone would say it didn't. the GPS was not operational until the update from HTC in the wm6.1 rom. this enabled GPS functionality.

please provide more information

[Superman369]

“ Originally Posted by drdrewdown ”

the HTC Touch(vogue) has a built in gps. no idea why anyone would say it didn't. the GPS was not operational until the update from HTC in the wm6.1 rom. this enabled GPS functionality.

please provide more information

That is correct

[iamdasht19]

“ Originally Posted by hallclj ”

ok, so i found out the my htc touch dont have internal gps, is there any way that i can change that?

the only way you wouldnt have it on your phone is the reasons that they said above or if you are a gsm user.

[hallclj]

so how do i update to wm6.1? and thanx 4 all da help

[Superman369]

“ Originally Posted by hallclj ”

so how do i update to wm6.1? and thanx 4 all da help

You have to flash to a ROM thats built with WM 6.1 Either the stock one or a custom one.

[hallclj]

thanx, i have the update and my gps is working now....i have one more question, where is the file GarminMobileXTFreeBasemap_5xxxx.exe? it wasnt in my download....