Diamond TF3D Config Tool 067

[LOGITECH]

Re: Diamond TF3D Config Tool 067

i tried to click on the "SOLUTION" link to read on how to get this to run on the pro, but its not re directing me to the page

[D/\SH]

Re: Diamond TF3D Config Tool 067

i tried to click on the "SOLUTION" link to read on how to get this to run on the pro, but its not re directing me to the page

no it isnt let the timer run down or read the thread!!!!!!!

[malden1]

Re: Diamond TF3D Config Tool 067

I installed this on my diamond and tryed to open it and got a error saying [An expected error has occured in Diamond TF3D config.exe ect]Im running juicys newest rom by the way

[D/\SH]

Re: Diamond TF3D Config Tool 067

I installed this on my diamond and tryed to open it and got a error saying [An expected error has occured in Diamond TF3D config.exe ect]Im running juicys newest rom by the way

please read through the thread been discussed and i even posted fix in this thread.....

just delete the file with the opera O next to it in the program files touchflo 3d config folder and than reopen and you will be golden....

[asiandrg0n]

Re: Diamond TF3D Config Tool 067

Can I suggest you post a duplicate of this thread in the TF3D theme section may stop lots of the confusion on how to use .theme files.

[D/\SH]

Re: Diamond TF3D Config Tool 067

Can I suggest you post a duplicate of this thread in the TF3D theme section may stop lots of the confusion on how to use .theme files.

make her up if you like bro and ill ge it stickied if you cant....... sounds like a great idea but i just dont have the time or the memory to do that right now.... if you dont want to i will hopefully rememebr and do it than..... if you do be sure to send me a pm or something to tell me to stick it :>

Thanks

[TaylorSPJ]

Re: Diamond TF3D Config Tool 067

Sorry if this is posted as a reply.... but I am having trouble I just bought the diamond yesterday and I have tried to install the config tool several times now and everytime it say error with

at f.m()
at Diamond_TF3D_Config.frmMain.v()
at
System.Windows.Forms.Form.OnLoad()
at
System.Windows.Forms.Form_SetVisible
Notify()
at
System.Windows.FOrms.Control.set_Visible()
at
System.Windows.Forms.Application.Run()
at a.a()

Can some one please help me!!!!

Got the same error too at first, got to the tf3d config folder and delete the tweak extention and you should be fine...works fine for me.

[payne130]

Re: Diamond TF3D Config Tool 067

I do not have that folder tf3d? I have the touch pro from sprint? Also if I delete the program under the Diamond TF3D Config app then how will I set up?

[D/\SH]

Re: Diamond TF3D Config Tool 067

I do not have that folder tf3d? I have the touch pro from sprint? Also if I delete the program under the Diamond TF3D Config app then how will I set up?

what are you talking about??? you install the cab file from this post.... if you dont know how to do that than look below at my signature and you will find what you need in the noob guide.

[D/\SH]

Re: Diamond TF3D Config Tool 0.6.7

added video to the first post for the new users :>

[TVDinner]

Re: Diamond TF3D Config Tool 067

Hi Dash
1) I have a Fuze
2) I have a problem and not sure where to go from here. I have installed Diamond TF3D Config Setup v0.6.7. I thought everything was working correctly until I tried to install the call history tab to the black theme (htc black). Everything went haywire from there.
3) I have attached a few screen shots for you to see. As you will see part of the theme has installed, but not all of it. Sometimes things work partially, and sometimes not at all. If I try to change it back to a standard TD3D theme it still does not work and the buttons along the bottom do not respond
4) My File Explorer also seems to be stuck trying to pull up the windows files. I have left it there for a while - I am able to X out of it but


Basically I would like to start again, but can't seem to get there, even if I do a reset through the TF3D config tool.

I am not panicing or anything like that, just wondering what to do from here to either go back to start or fix, while not messing it up anymore.
Any help would be appreciated.

[D/\SH]

Re: Diamond TF3D Config Tool 067

Hi Dash
1) I have a Fuze
2) I have a problem and not sure where to go from here. I have installed Diamond TF3D Config Setup v0.6.7. I thought everything was working correctly until I tried to install the call history tab to the black theme (htc black). Everything went haywire from there.
3) I have attached a few screen shots for you to see. As you will see part of the theme has installed, but not all of it. Sometimes things work partially, and sometimes not at all. If I try to change it back to a standard TD3D theme it still does not work and the buttons along the bottom do not respond
4) My File Explorer also seems to be stuck trying to pull up the windows files. I have left it there for a while - I am able to X out of it but


Basically I would like to start again, but can't seem to get there, even if I do a reset through the TF3D config tool.

I am not panicing or anything like that, just wondering what to do from here to either go back to start or fix, while not messing it up anymore.
Any help would be appreciated.

that tab prolly doesn't work with your phone..... so take the tab off and see if that fixes your troubles..... if not you can always do the hard reset by going to start/settings/system/system restore.

[TVDinner]

Re: Diamond TF3D Config Tool 067

that tab prolly doesn't work with your phone..... so take the tab off and see if that fixes your troubles..... if not you can always do the hard reset by going to start/settings/system/system restore.

Thanks for the quick response. I shut the Fuze off and turned it back on again and was able to bring it back to the non TF3D screen (see attached image).

I would like to avoid hard resetting if possible. How do I "take the tab off" as you suggested above. I have learned how to install, but what is the easiest way to remove. Thanks.

[D/\SH]

Re: Diamond TF3D Config Tool 067

Thanks for the quick response. I shut the Fuze off and turned it back on again and was able to bring it back to the non TF3D screen (see attached image).

I would like to avoid hard resetting if possible. How do I "take the tab off" as you suggested above. I have learned how to install, but what is the easiest way to remove. Thanks.

how was it installed? was it a cab file or did you install through the touchflo 3d config tool? if you did it cab wise go to start/settings/system/remove programs. if you did it through the config tool than just to it opposite of what you did to getr ti there... most likey unchecking it.

[TVDinner]

Re: Diamond TF3D Config Tool 067

how was it installed? was it a cab file or did you install through the touchflo 3d config tool? if you did it cab wise go to start/settings/system/remove programs. if you did it through the config tool than just to it opposite of what you did to getr ti there... most likey unchecking it.

Thanks for the info. Here is an update:
1) I removed it and that seems to get my functionality back (see attached pic)

2) it seems I have something called "Sushi's Diamond TF3D Config" program. Is that yours from this thread? If not should I remove and use yours from here on out?

3) If this program is ok - what would the next step be to try to get the black theme back on the phone. should i go through that sushi diamond config tool and try again, or do something new.

thank you very much sir, and I would be happy to donate somewhere for the assistance.